When a machine needs to know the exact distance to an object, a weak or noisy sensor can cause missed stops, product damage, or safety hazards. In fast production lines this leads to costly downtime and unhappy customers. The Pepperl + Fuchs Through Beam Distance Sensor Block Sensor 300 mm Detection Range gives you a reliable, precise measurement that works even in bright light, so you can keep your process running smoothly and safely.
Pepperl + Fuchs Through Beam Distance Sensor Block Sensor 300 mm Detection Range with Pepperl
You need a sensor that can see a target from 100 to 300 mm with 0.1 mm resolution. This Pepperl product is a through-beam distance sensor that uses a modulated red LED and a robust IP67 housing. It solves the common problem of unreliable detection in dusty or brightly lit environments, giving you fast 2 ms response and stable output through IO-Link.
Benefits
Specifications
| Genreal Specifications |
|
| Measuring range |
100 ... 300 mm |
| Reference target |
standard white, 100 mm x 100 mm |
| Light source |
LED |
| Light type |
modulated visible red light |
| LED risk group labelling |
exempt group |
| Angle deviation |
max. +/- 1.5 ° |
| Diameter of the light spot |
approx. 8 mm at a distance of 300 mm |
| Opening angle |
1.8 ° |
| Ambient light limit |
EN 60947-5-2 : 45000 Lux |
| Resolution |
0.1 mm |
| Function and Safety related parameters |
|
| MTTFd |
600 a |
| Mission Time (TM) |
20 a |
| Diagnostic Coverage (DC) |
0 % |
| Indicators/Operating means |
|
| Operation indicator |
LED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
|
| Function indicator |
LED yellow:
constantly on - switch output active
constantly off - switch output inactive
|
| Control elements |
Teach-In key |
| Control elements |
5-step rotary switch for operating modes selection |
| Electrical Specifications |
|
| Operating voltage UB |
10 ... 30 V DC |
| Ripple |
max. 10 % |
| No-load supply current I0 |
< 25 mA at 24 V supply voltage |
| Protection class |
III |
| Interface |
|
| Interface type |
IO-Link ( via C/Q = pin 4 ) |
| IO-Link revision |
1.1 |
| Device profile |
Identification and diagnosis |
| Smart Sensor type |
0/type 3.3 |
| Device ID |
0x111904 (1120516) |
| Transfer rate |
COM2 (38.4 kBit/s) |
| Min. cycle time |
3 ms |
| Process data width |
Process data input 4 byte Process data output 2 bits |
| SIO mode support |
yes |
| Compatible master port type |
A |
| Output |
|
| Switching type |
The default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 - Pin2: NPN normally-open, PNP normally-closed
|
| Signal output |
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Switching voltage |
max. 30 V DC |
| Switching current |
max. 100 mA , resistive load |
| Usage category |
DC-12 and DC-13 |
| Voltage drop Ud |
≤ 1.5 V DC |
| Response time |
2 ms , see table 1 |
| Measurement Accuracy |
|
| Temperature drift |
0.05 %/K |
| Warm up time |
5 min |
| Repeat accuracy |
< 0.5 % , see table 1 |
| Linearity error |
0.5 % |
| Approvals and Certificates |
|
| UL approval |
E87056, cULus Listed, class 2 power supply, type rating 1 |
| CCC approval |
CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
|
| Ambient temperature |
10 ... 60 °C (50 ... 140 °F) |
| Storage temperature |
-40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection |
|
| Degree of protection |
IP67 / IP69 / IP69K |
| Connection |
4-pin, M12 x 1 connector, 90° rotatable |
| Material |
|
| Housing |
PC (Polycarbonate) |
| Optical face |
PMMA |
| Mass |
|
| Mass |
approx. 37 g |
| Dimensions |
|
| Height |
50.6 mm |
| Width |
15 mm |
| Depth |
41.7 mm |
