Looking for a compact computer that can survive a factory floor and stay connected without cables? The Moxa Arm-based Wireless-enabled DIN-Rail Industrial computer is built for harsh environments and remote monitoring. It solves the common problem of unreliable networking and limited space in control panels. If you need a reliable controller that fits on a DIN rail and talks over Wi-Fi, this device is the answer.
Moxa Arm-based Wireless-enabled DIN-Rail Industrial computer
Many industrial sites struggle with tangled cables, frequent downtime, and devices that cannot fit into tight enclosures. Those issues cause lost production and higher maintenance costs. This Moxa computer removes the need for extra wiring by offering built-in wireless, and its DIN-rail form factor saves space. It gives you a stable Linux platform, fast Ethernet, and serial ports so you can keep your machines running smoothly.
Benefits
- Wireless connectivity reduces cable clutter and speeds up installation.
- Compact DIN-rail design fits into existing panels without redesign.
- Industrial-grade temperature range keeps the system running in hot or cold plants.
- Built-in watchdog and automatic reboot protect against software hangs.
- Low power consumption lowers energy bills and heat output.
Usages
Use this computer to monitor production lines in factories, control HVAC systems in large buildings, or collect sensor data in water treatment plants. It works well in remote oil-field sites where wired networks are impractical. The dual serial ports let you link legacy PLCs, while the Ethernet ports handle modern IoT devices. It can also serve as a gateway for edge computing in smart-city lighting projects.
Specification
| CPU |
Armv7 Cortex-A8 1 GHz |
| DRAM |
512 MB DDR3 |
| Supported OS |
Moxa Industrial Linux 1 (Debian 9, kernel 4.4), 2027 EOL |
| Storage Pre-installed |
8 GB eMMC |
| Storage Slot |
SD slot × 1 |
| Ethernet Ports |
2 × Auto-sensing 10/100 Mbps (RJ45) |
| Serial Ports |
2 × RS-232/422/485 (software-selectable, X2 connector) |
| USB 2.0 |
1 × Type-A host |
| Expansion Slots |
1 × mPCIe |
| SIM Slot |
1 Mini SIM |
| Buttons |
Reset button |
| Console Port |
RS-232, 4-pin header (115200, n, 8, 1) |
| Ethernet Isolation |
1.5 kV magnetic isolation |
| Serial Baudrate |
300 bps – 921.6 kbps |
| Serial Data Bits |
5, 6, 7, 8 |
| Serial Stop Bits |
1, 1.5, 2 |
| Serial Parity |
None, Even, Odd, Space, Mark |
| Serial Flow Control |
RTS/CTS, XON/XOFF, ADDC for RS-485, RTS toggle (RS-232 only) |
| Serial Signals |
RS-232: TxD, RxD, RTS, CTS, GND; RS-422: Tx+, Tx-, Rx+, Rx-, GND; RS-485-2w: Data+, Data-, GND |
| LED Indicators |
Power ×1, SD ×1, Programmable ×3, USB ×1, Wireless ×3 |
| Input Voltage |
12–24 VDC |
| Input Current |
480 mA @ 12 VDC, 225 mA @ 24 VDC |
| Power Consumption |
5.4 W |
| Reliability |
RTC, Built-in WDT, Automatic reboot trigger |
| Dimensions |
101 × 27 × 128 mm (3.98 × 1.06 × 5.04 in) |
| Weight |
224 g (0.5 lb) |
| Housing |
Plastic |
| Installation |
DIN-rail, wall mounting (optional kit) |
| Operating Temperature |
-10 to 60°C (14 to 140°F) |
| Storage Temperature |
-20 to 80°C (-4 to 176°F) |
| Relative Humidity |
5–95% non-condensing |
| Shock |
IEC 60068-2-27 |
| Vibration |
2 Grms, IEC 60068-2-64, 5–500 Hz, 1 hr per axis (without USB devices) |
